BIOS Setup
Advanced menu - Advanced system settings
56
A26391-K84-Z100-1-7619
Reset Configuration Data
This field is used to specify whether the configuration data is reset and reinitialized when the system is
started.
No
The Plug&Play functionality ascertains the current configuration data and uses it to
initialize the installed modules and drives. There is no update when the system is
started.
Yes
When the system is started the old configuration data is reset. The new configuration
data is determined by means of the Plug&Play functionality. The mounted modules and
drives are then initialized with this data.
i
This field only takes effect if the notebook is connected to a MobiDock.
Large Disk Access Mode - Hard disk access
This field is used to specify the type of hard disk access for large hard disks (more than 1024
cylinders, 16 heads). The default setting depends on the operating system used.
DOS
the operating system uses MS-DOS-compatible hard disk accesses.
Other
If the operating system uses hard disk accesses which are not MS-DOS-compatible
(e.g. Novell, SCO Unix).
