Operation
5.4 Return to coded/decoded display mode
FIDAMAT 6-G
Operating instructions, 07/2006, A5E00478463
5-7
5.4
Return to coded/decoded display mode
With the [MEAS] key, you can jump from "Operating mode" back to "Decoded display mode".
Any input started is aborted.
Before returning, the following query appears:
Return to measuring THC
Accept modifications?
YES
NO
Figure 5-5
Query before returning
•
Press "YES" to accept changes permanently into the working memory of the parameter
memory or "NO" to discard the changes. Afterwards, the device changes to "Decoded
display mode".
•
Press [ESC] to return to the last function screen. Changes are accepted here without a
further query.
Coding the device
After returning to "Decoded display mode" with [ESC] or [MEAS], if you press [MEAS] again
you put the device back into "Coded display mode". Only now is the functional check
deactivated again.
5.5
Fast function selection
In order to get directly to the desired function when operating frequently from the "Coded
display mode", a "Power user operation" was created. This allows you to directly access the
desired function by inputting the function number. This allows you to skip menu levels. The
functions can only be directly called from "Coded display mode", however. For fast function
selection, proceed as follows:
1.
Input the number of the desired function using the number keys.
2.
Press the softkey of the component with the arrow ►. If the desired function is protected
by a code, you will be asked to input the code.
See also