Operation
5.11 Configuration
FIDAMAT 6-G
5-50
Operating instructions, 07/2006, A5E00478463
5.11.7
Reset (function 74)
Figure 5-52 Carrying out a reset
With this function, you can restart.
After calling this function, the device switches to the "Warm-up phase" operating state, which
activates the functional check at the same time. Only after successfully running through this
phase the device is completely ready for operation again.
See also
Warm-up phase and operating states (Page 4-5)
5.11.8
Save data, load (function 75)
Figure 5-53 User data memory
With this function, configure the user data memory:
Press the softkey 1
"Save user data" e.g. after the system has been successfully
commissioned. All individual settings are then saved.
Press the softkey 2
"Load user data", to load the last saved user data.
These functions are important when the device is undergoing repairs or maintenance work,
or, for example, new parameterization should be tried out.
Press softkey 3 to re-establish the factory settings.