Technical data
7.2 Technical data of the FIDAMAT 6-G
FIDAMAT 6-G
Operating instructions, 07/2006, A5E00478463
7-3
Electric in- and outputs
Analog inputs
2, laid out on 0/ 2/ 4 up to 20 mA for external
pressure sensor and carrier gas correction
(interference gas correction)
Binary inputs
6, designed for 24 V, floating, can be freely
parameterized, e.g. for measuring range
switching
Serial interface
ELAN (RS 485)
Options
AUTOCAL function with 8 additional binary inputs
and relay outputs each, also with PROFIBUS-PA
or PROFIBUS-DP
Table 7-8
Technical data - climatic conditions
Climatic conditions
Permissible ambient temperature
+5 °C to +45 °C in operation
-30 °C to +70 °C during storage and shipping;
Permissible humidity
< 90 % RH (RH = relative humidity) as an
average over the year, during storage and
shipping (no dropping below the dew point)
See also
7.2
Technical data of the FIDAMAT 6-G
Table 7-9
Technical data - General
General information
Measurement ranges
4, internally and externally switchable;
manual and automatic measuring range switch
possible
Automatic measuring range switch
Hysteresis, selectable
Smallest possible measuring span
0-10 ppm
Detection limit
0.03 ppm
Largest possible measuring span
99,999 ppm
Concentration units (ppm)
C1, C3, C6, mg C/m3
Measured value display
Digital concentration display (5 digits with floating
decimal)
Digital display resolution
0.1 % of the measured value
Used position
Vertical front wall
Conformity
CE marking EN 50081-1, EN 50082-2
Oven temperature
Can be set to between 100-200 °C (depending on
the application)