Siemens EH675TK11E, Repair Instruction, Page: 24 / 113

206_58300000141095_ara_en_k.doc – 04.10.a Seite 24 von 113
1.1.2 32 cm triple inductor (New feature IH5-I)
Made up of 3 rings: internal, middle and external.
Internal ring = 210mm
Middle ring = 260mm
External ring= 320mm
3.5.1.1 Power table in Watts.
Power/diameter
210 mm 260 mm 320 mm
P Standard 2200 2600 3300
P booster 3300 3400 3600
P Superbooster - - 4600
In order to activate the superbooster of the triple inductor, an auxiliary
plate is needed. See relay plate.
The superbooster can only be activated on the external ring.
3.5.2 28 cm Double Inductor
The auxiliary plate of the double inductor in order to activate the
superbooster has been integrated into the ELIN, simplifying the
connection diagram.
3.5.2.1 Power table in Watts
Power/diameter
180 mm 280 mm
P Standard 1800 2800
P booster 2500 3000
P Superbooster - 4400
3.5.3 Bräter Inductor
The auxiliary plate of the Bräter inductor in order to activate the
booster has been integrated into the ELIN, simplifying the connection
diagram.
The Bräter zone warms first the zone extension and later the small
ring. If the customer uses a too big Bräter, the cooking is not good.
It is important to use a Bräter of correct measure and to position it
correctly in the cooking zone. (Accessory: Z9410X0 = 464746)
3.5.3.1 Power table in Watts
Power/diameter 180 mm 280 mm
P Standard 1800 2000
P booster 2500 2600
P Superbooster - -