Siemens EcoView Owner'S Manual Download Page 57

Page: 57 / 62

EcoView Web

Graphs

57 | 62

Siemens Industry, Inc.

EcoView Energy Management System

125-3586

Building Technologies

2017-09-11

The Pulse graph summarizes the energy consumed from pulse input devices at one or

more sites over a period of time (hourly, daily, weekly, or monthly).
NOTE: This graph requires that the EcoView Multi-phase Meter be installed at the site.

Temp Sensor

The Temp Sensor graph summarizes the auxiliary temperature readings for one site

over a period of time. One or more auxiliary temperature sensors at the site may be

selected.

Generating and Exporting Graphs

1. From the menu bar, click Graphs.

The Graph Parameter Selection dialog box displays.

2. In the Graph Parameter Selection dialog box, follow the onscreen instructions to

select a site(s) for which to generate graph(s), and then click Go.

The specified graph displays.

3. If desired, click the OK button to return to the Graph Parameter Selection page,

change your selections and regenerate the graph.

4. If desired, click Export to CSV to export the graph data to a CSV file. This allows

you to perform additional evaluation of the information in a spreadsheet or

database program.

NOTE: Depending on your browser security settings, you may need to allow the

browser to download the file.

Figure 25: Graph Parameter Selection Dialog Box.

Summary of Contents for EcoView































































Search results

Summary of Contents for EcoView

Reviews:

Related manuals for EcoView

Brands by name

Popular brands

Siemens EcoView, Owner'S Manual

Search results

Summary of Contents for EcoView

Reviews:

Related manuals for EcoView

Brands by name

Popular brands