EcoView Web
Site Explorer
46 | 62
Siemens Industry, Inc.
EcoView Energy Management System
125-3586
Building Technologies
2017-09-11
3. To use a specific time for this transition, select Use Specific Time, then type the
time in the box. Use a 24-hour format to eliminate errors between AM and PM.
4. To use astronomical scheduling select Sunrise/Sunset, then select either Sunrise
or Sunset as the trigger. If an offset is desired, select the number of minutes before
(-) or after (+) the trigger time. The sunrise and sunset times are calculated daily
from the Site Address and Time Zone.
5. Click the OK button.
Adding Transitions to the Periods
1. To add or edit transitions to the periods, click the + next to the transition name,
then click + in the toolbar.
2. Click on a device, and then select a point to command. (Multiple points can be
selected simultaneously).
3. Select the state or setting for each point.
4. Click OK to complete.
