Siemens DOW1171 Technical Manual Download Page 51

Page: 51 / 82

Mounting/Installation

Installing the radio smoke detector DOW1171

51 | 82

Building Technologies

009865_m_en_--

Fire Safety

2015-11-06

Inserting the batteries

WARNING

Short-circuit as a result of incorrectly inserting batteries
Warming of batteries and risk of fire

●

When inserting battery, note polarity.

Insert the batteries in the devices just before commissioning the fire detection

installation.

The radio smoke detector DOW1171 is installed on the base DBW1171.

1. Remove the radio smoke detector DOW1171 from the radio base DBW1171.
2.

WARNING! Device does not work! Only use the battery type intended for

the device!

3. Connect clip to 9 V lithium manganese dioxide battery contacts and insert

battery in back box's battery compartment.
– Repeat this step for the second battery.

4. Install the radio smoke detector in the base.

The radio smoke detector is ready for commissioning.

Battery compartment and log-on button on the DOW1171

1 Battery compartment for two 9 V

lithium manganese dioxide

batteries

2 'New' log-on button

Summary of Contents for DOW1171



















































































Search results

Summary of Contents for DOW1171

Reviews:

Related manuals for DOW1171

Brands by name

Popular brands

Siemens DOW1171, Technical Manual

Search results

Summary of Contents for DOW1171

Reviews:

Related manuals for DOW1171

Brands by name

Popular brands