Siemens DOW1171 Technical Manual Download Page 43

Page: 43 / 82

Planning

Compatibility

43 | 82

Building Technologies

009865_m_en_--

Fire Safety

2015-11-06

4 Planning

When planning a project, proceed as follows:

●

Use a suitable radio test set to measure the local radio wave propagation (field

strength measurement) in the building.

●

Plan how to split the radio coverage into individual radio cells.

You will need this information for the number and positioning of the radio

gateways.
Note requirements in standards (e.g. fire sectors according to EN 54, local

specifications etc.).

The radio gateway may only be operated on a loop in the FDnet. Since the radio

gateway and connected radio detectors form a stub, this configuration must never

be used in stub operations. If it is, an impermissible 'stub-on-stub' topology will

result.

Summary of Contents for DOW1171



















































































Search results

Summary of Contents for DOW1171

Reviews:

Related manuals for DOW1171

Brands by name

Popular brands

Siemens DOW1171, Technical Manual

Search results

Summary of Contents for DOW1171

Reviews:

Related manuals for DOW1171

Brands by name

Popular brands