Siemens Desigo RXB, Technical Manual, Page: 205 / 476

125/140
Siemens RXB (KNX) Applications library CLC and RAD description of functions for CC-02 CM110384en_03
Building Technologies KNX information 28 Feb 2009
Visible CC-02
Parameter no. Description
Name
d = Displa
y (display only)
(mode
2)
P =
Parameter (mode
3)
("Minor parameterization") S =
Service(m
ode
6)
("Major parameterization") RAD01 CLC01 CLC02
119 103 On-delay occupancy detector d S X X X
238 Operating system version d S X X X
078 86 Outside temp 0% valve pos d S X X
079 86 Outside temp max valve pos d S X X
018 23 Outside temperature zone. d P S X X*) X
001 16 Physical address (area address) d P S X X X
003 16 Physical address (device address) d P S X X X
002 16 Physical address (line address) d P S X X X
005 Plant type d S X X X
032 105 Precomfort cooling setpoint d S X X
035 70 Precomfort heating setpoint d P S X X
135 105
Preecooling (Precool),
Free cooling (Freecool)
d S X X X
030 70 Protection cooling setpoint d S X X
037 70 Protection heating setpoint d S X X
128 102 Receive timeout d S X X X
017 23 Refrig distr zone cooling surface d P S X*) X X
137 110 Reset setpoint offset d S X X X
123 Room number 7) d S X X X
052 88 Running time cool surface valve d S X X
064 82 Running time heat surface valve d S X X
127 102 Send heartbeat d S X X X
110 116 Setpoint display d S X X X
103 115 Setpoint offset range d S X X X
109 116 Standard display d S X X X
092 75 Temperature sensor B1 d S X X X
108 115 Temperature unit d S X X X
117 103 Temporary Comfort mode d S X X X
011 23 Time switch zone (apartment) d P S X X X
012 23 Time switch zone (room) d P S X X X
013 23 Time switch zone (subzone) d P S X X X
*)
HandyTool: Visible but not used by the application
7) HandyTool: cannot be mapped