Siemens Desigo RXB, Technical Manual, Page: 248 / 476

12/166
Siemens RXB (KNX) application library FNC Description of functions for FC-10, FC-11, FC-12 CM110385en_05
Building Technologies Definitions / Tools 28 Feb 2009
All communication objects which operate in LE-mode are described as follows:
Possible partner-
function blocks 3) Known partner devices 4)
HVACMode 1)
Timeswitch zone 2)
110 HVACS
HVAC-Mode Scheduler
104 PMC
Program to HVAC-Mode
Conversion
Siemens
Synco RM700
Key
1) Enter the name of the LTE communication object here.
2) Each LTE communication object is assigned to a zone.
This is recorded here.
3) This is where suitable partner-function blocks are listed. They are described in the
Konnex specification.
4) The devices listed here (manufacturer and type) are suitable partners for the
communication object.
For a list of all LTE mode communication objects, refer to section
13.6 .
A detailed description of the Konnex data types in section 0 .
The left margin contains the symbol for the HandyTool next to a table containing the
parameter number, short name and basic setting.
The number has syntax *xxx, with xxx being a three-digit number.
HandyTool Parameter Short name Basic setting
*027 Setpoint additional heating 25.0°C
A list of the parameters by number and in alphabetical order is located in sections
13.7
and 13.8 .
A table of parameters with enumerations fort he HandyTool is shown in Section 13.9 .
LTE-mode
communication objects
Note
HandyTool
Note