Siemens COMOS, Operating Manual

Page: 23 / 156

Function of the structure object Value of
"ParameterName"
Flange standard system:
The flange system of standards can be found under the following nodes.
DIN/EN:
● "@30 > M23 > A10 > Y30 > A10 > 1 > A60 > 1 Basic geometry flange
dimensions"
● "@30 > M23 > A10 > Y30 > A10 > 1 > A60 > S2 Flange standards acc. EN
1092/T1 (2007)"
ANSI/ASME:
● "@30 > M23 > A10 > Y30 > A10 > 10 > A60 > A10 Geometry contact face"
● "@30 > M23 > A10 > Y30 > A10 > 10 > A60 > A20 Geometry flange face
dimensions"
● "@30 > M23 > A10 > Y30 > A10 > 10 > A60 > A30 Geometry flange length"
"Flange standard"
Connection type:
The types of joints can be found under the following nodes.
DIN/EN:
● "@30 > M23 > A10 > Y30 > A10 > 1 > A60 > 1 > A20 Geometry flange face
dimensions"
ANSI/ASME:
● "@30 > M23 > A10 > Y30 > A10 > 10 > A60 > A20 Geometry flange face
dimensions"
"Connection type"
Pressure stage:
The geometry tables can be found on the lowest level under the node "@30 >
M23 > A10 > Y30 > A10 > 1 > 60 Basic geometry flange dimensions". This table
describes the pressure stages.
"Nominal pressure"
Other objects for structuring of catalog:
For example: structure objects for construction lengths, pipe schedules, outside
diameters.
"- - -"
See also
Using the "CatStd(...)" function (Page 32)
3.4.2.3 Extending the "Standard parameterization table"
You can add new parameters to the existing parameters. COMOS then takes these parameters
into account when calculating the basic tables.
To add parameters, extend the "Standard parameterization table".
"Standard parameterization table"
Database:
"Standard tables > @40 > Y00 > A10 > A90 > Y00N00204 Standard parameterization table"
Preparing for creation and maintenance of pipe specs
3.4 Managing the "standard geometry tables" standard catalog
PipeSpec Designer
Operating Manual, 09/2014, A5E32076948-AA
23