Configuring Alarms, Areas, Home, Privacy Settings and Presets
10.6.3 Removing
or
Hiding Privacy Zones
If you made an error during programming or no longer require Privacy Zones,
individual zones or all Privacy Zones may be deleted. To temporarily remove the
Privacy Zones, you may disable their appearance by changing the Hide All Zones
setting to Yes.
To delete individual Privacy Zones, you must adjust the position of the arrows to
the area of the screen where the zone is recognized by the firmware. If multiple
Privacy Zones are close together or overlap, the arrows blink, indicating that the
selection is not allowed.
Navigate to zone
ZOOM to delete zone
FOCUS quits w/o changing
Zone 2
Zone 1
Arrows blink to indicate this is
an invalid selection.
Zone 3
Fig. 36
Deleting Privacy Zones – Invalid Selection
Three Privacy Zones are illustrated. Zones 1 and 2 are overlapping. Zone 1 and 3
are in close proximity. In this situation, the arrows blink because the target area is
the same distance from all three zones.
To ensure that the correct Privacy Zone is deleted, place the arrows clearly in the
zone you want to delete Fig. 37 illustrates a valid selection.
Navigate to zone
ZOOM to delete zone
FOCUS quits w/o changing
Zone 2
Zone 1
Zone 3
Arrows stop blinking indicating
this is a valid selection.
Fig. 37
Deleting Privacy Zone – Valid Selection
By moving to the left, the arrows stop blinking when the target area enters Zone 1.
Pressing Zoom allows you to delete Zone 1. If you do not want to delete the zone,
press
Focus
.
118
Siemens Building Technologies
BE_CCDA1415-DN.doc
Fire & Security Products
05.2004
