Configuring Alarms, Areas, Home, Privacy Settings and Presets
10.3 Assigning the Dome’s Home Position
The home position is a preset or pattern that automatically runs after a designated
period of dome inactivity. Use this option if you want a specific area to be under
surveillance after an operator stops moving the dome.
To assign the home position, select Set Home Position from the
Alarms/Areas/Home/Presets/PZ
screen. The following screen appears:
SET HOME POSITION
HOME POSITION
NO ACTION
RETURN TIME MINS 1-60 (10)
EXIT
PRESET 1-96
PATTERN 1-3
Fig. 29
Set home position
Tip
:
When a pattern is selected as the home position, the pattern runs until stopped manually by issuing a
camera command, such as Tilt or Focus.
Setting the Home Position
1. Select
Alarms/Areas/Home/Presets/PZ
from the Dome Configuration Menu.
2.
Select Set Home Position.
The highlight bar appears on the Home Position setting.
3.
Select a setting.
–
Select Preset to use a preset as the home position. Continue with step 4.
–
Select Pattern to use a pattern as the home position. Continue with step 4.
–
Select No Action if you do not want to set a home position. Continue with
step 5.
4.
Move the highlight bar to the Number field, and select a number.
–
For preset, select the number from 1 through 64. Continue with step 5.
i
NOTE
:
The protocol used may support fewer presets.
–
For pattern, select the number from 1 through 3 for the pattern you want to
assign. Continue with step 5.
If the selected pattern is not programmed, the dome runs the Apple Peel
pattern.
5.
Move the highlight bar to Return Time Mins. Set the amount of time that the
dome must remain inactive before returning to the home position.
–
The setting ranges from 1 to 60 minutes.
6.
Select Exit to return to the
Alarms/Areas/Home/Presets/PZ
screen.
NOTE
:
If you selected a preset that has not been programmed, preset programming automatically starts.
7. When
the
Alarms/Areas/Home/Presets/PZ
screen appears, select Exit. The
Dome Configuration Menu appears.
111
Siemens Building Technologies
BE_CCDA1415-DN.doc
Fire & Security Products
05.2004
