Siemens 670 V2 Operating Instructions Manual Download Page 77

Page: 77 / 106

Panel PC 670 V2/870 V2, Control unit
Operating Instructions, Edition 03/2004, CD Documentation and Drivers

9-1

Maintenance and Service

9.1

Service

Scope of service

The device is designed to require little service. Clean the keyboard membrane nevertheless.

Cleaning agent

Use dish soap or foaming screen cleaner only as cleaning agents.

Caution
Do not clean the device with agressive solvents or scrubbing agents or with pressurized air

or steam cleaner.

Procedure

1. Turn off the device. This prevents the accidental triggering of functions when the keys are

touched.

2.  Dampen the cleaning cloth.
3.  Spray the cleaning agent on the cloth and not directly on the device.
4.  Clean the device with the cleaning cloth.

Summary of Contents for 670 V2











































































































Search results

Summary of Contents for 670 V2

Reviews:

Related manuals for 670 V2

Brands by name

Popular brands

Siemens 670 V2, Operating Instructions Manual

Search results

Summary of Contents for 670 V2

Reviews:

Related manuals for 670 V2

Brands by name

Popular brands