Description
3.4 Available combinations
Panel PC 670 V2/870 V2, Control unit
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
3-5
3.3.2
Configuration
The illustration in the overview depicts the components of the decentralized design:
•
The remote module unit, also called receiver, and an optional direct key module are
attached to a mounting plate, which is screwed to the back of the control unit.
•
The host module, also called sender, is installed below the computer unit between the
mounting rails.
•
Connect the remote module and host module with a cable from the options.
Note
Refer to the relevant order variant in the catalog for the components of the decentralized
design. Before delivery from the factory, the order will beconfigured.
3.4
Available combinations
The available cominations of control unit and computer unit are listed in the table.
Control unit
computer unit
10.4" TFT
12.1" TFT
15.1" TFT
12.1" TFT
touch screen
15.1" TFT
touch screen
PC 670 V2 central design
X
X
X
X
X
PC 670 V2 decentralized design
—
X
X
X
X
PC 870 V2 central design
—
X
X
—
X
PC 870 V2 decentralized design
—
X
X
X
X
X = available
Direct key module
For more information, refer to the start up instructions included with the direct key module
3.5
Options
Components
The options comprise the following components:
Options
Order No.
Direct key module
6AV7671-7DA00-0AA0
Film for protecting the touch screen panel against dirt and
scratches
for 12" touch screen varaiant
for 15" touch screen variant
6AV7671-2BA00-0AA0
6AV7671-4BA00-0AA0
Labeling strips
for 10" keyboard variant
for 12" keyboard variant
for 15" keyboard variant
6AV7671-0CA00-0AA0
6AV7671-3CA00-0AA0
6AV7671-5CA00-0AA0
The printing templates for the labelling strips can be obtained from the internet address in the
preface.