Operating and parametrizing
8.1 Start up
Panel PC 670 V2/870 V2, Control unit
8-6
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
Figure 8-4
Touch screen calibration
9. Click on the "Calibrate" button. The dialog for touch calibration will appear.
10. Touch the cross hairs on the touch screen for at least 3 seconds and no longer than 10
seconds. The "Calibration complete" dialog will appear. Exit the calibration by clicking on
the "Done" button.
11. After installing the drivers and applications, exit the operating system session and restart
the computer unit.
The installation of the drivers and applications is complete. For more information, please
refer to the chapter "Additional drivers and applications" in the control unit operating
instructions.
Notice
After starting up your device, find out more about the particulars of the operating system in
the chapter "Starting up" in the computer unit operating instructions. More information about
the Microsoft Windows operating system is located in the chapter "Maintenance and
Service" in the computer unit operating instructions.
Raid system
Applies only to the raid system option: The application "Raid promise monitor" will appear
after every restart of the computer unit. For additional information, please refer to the chapter
"Functions" in the computer unit operating instructions.