Operating and parametrizing
8.2 Normal operation
Panel PC 670 V2/870 V2, Control unit
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
8-7
Figure 8-5
Raid promise monitor
8.2
Normal operation
8.2.1
Turning on device
Requirement
•
The I/O modules, e.g. mouse and keyboard, have been connected.
Caution
Connect the I/O modules using shielded cable and metal plugs. Otherwise the operating
license expires. Secure the plug of the interface cable on the housing of the device. This
improves the electrical shielding.
Follow the guidelines in the "Interfaces" section of the chapter "Connecting."
•
The operating system and the service packs have been installed and set up on the hard
disk of the device. For additional information, please refer to the chapter "Starting up" in
the computer unit operating instructions.
•
The pre-installed drivers and applications have been set up appropriately. For more
information, please refer to the chapter "Additional drivers and applications."
•
The proper ambient and environmental conditions according to the technical data for the
device and the connected I/O modules have been observed.
