Usage planning
4.6 Recessed mounting cut-out
Panel PC 670 V2/870 V2, Control unit
4-8
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
Procedure
1. Please comply with installation guidelines.
2. Select a location suitable for installation, taking into account the installation guidelines
and the chosen installation position.
3. On the basis of the dimension diagrams, check whether the required screw and pressure
points on the backside and the hatched sealing area are easily accessible after the
completion of the recessed mounting cut-out. Otherwise the recessed mounting cut-out is
useless.
4. Complete the recessed mounting cut-out according to the dimension diagrams. Take into
account the mounting depth of the control unit in the decentralized design, which must be
deeper due to the direct key module and remote module.