Operating and parametrizing
8.3 Additional drivers and applications
Panel PC 670 V2/870 V2, Control unit
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
8-11
Figure 8-6
Touch settings tab control
3. Click on the "Drawing" button.
4. Click on the "Right click" button. The right click tool will be activated.
8.3.3
Repeating calibration
Introduction
If the touch screen does not react as expected when touched, repeat the calibration. To do
this, first activate the 2 point calibration and then calibrate the touch screen.
Procedure
1. Start the touchware settings as described in the last section.
2. Switch to the "Touch settings" tab control. The following dialog will appear: