The inversion of the position signal (sensor flipped) does not affect the LED behavior.
8.4.3
Bar code detection
The OLS10 has the option of detecting 1D bar codes in the interleaved 2/5 format. Up
to 4-digit bar codes are detected and read out in this case.
The OLS10 outputs the number value of the bar code via CANopen or Ethernet.
In addition to track tape, SICK also offers a set of numbered bar codes as accessories
see "Accessories", page 39
. The assignment of the bar code value to a certain drive
command or piece of position information must be done on the control side.
8
OPERATION
32
O P E R A T I N G I N S T R U C T I O N S | OLS10
8022017.10HG/2018-07-18 | SICK
Subject to change without notice
