Operating Instructions
Chapter
4
TPS
8021799/2017-09-26
Operating Instructions | SICK
25
Subject to change without notice
Mounting
Mounting LMS151 RDW to the vehicle
The Road Departure Warning (RDW) LiDAR sensor must be mounted at the front of the
truck, towards the left side. The sensor is mounted with a tilt angle of approximately 35
degrees downwards as its field of view must include the road surface in front of the truck
as well as the left-side road barrier/ wall.
Fig. 20: Mounting position of the LMS151 RDW
The exact angle is defined by its mounting height and will be adjusted during system
setup. Please avoid unnecessary obstructions.
4.3
Mounting the bracket for the operator display
The operator display is mounted in the truck cab. It must be clearly visible for the truck
driver without them having to turn their head.
The operator display is mounted using the mounting kit included with delivery. This means
that the display is additionally protected against mechanical shocks.
The mounting kit is made up of the bracket (1) and an adapter (2) to hold the operator
display.
Fig. 21: Mounting the operator display
Note