Chapter
1
Operating Instructions
TPS
6
Operating Instructions | SICK
8021799/2017-09-26
Subject to change without notice
About these operating instructions
1
About these operating instructions
Please read through this chapter carefully before you use the documentation and work
with the TPS driver assistance system.
1.1
Function of this document
These operating instructions are designed to give
technical personnel
instructions on
the safe mounting, configuration, electrical installation, commissioning, operation and
maintenance of the
T
ruck
P
rotection
S
ystem TPS.
These operating instructions do
not
provide information on operating the vehicle into
which the TPS is or will be integrated. For information about this instruction, refer to the
vehicle's operating instructions.
1.2
Target group
These operating instructions are intended for people who install, connect, commission,
operate, and maintain TPS.
Activities
Target group
Mounting, electrical installation,
maintenance, and replacement
of system components
Qualified personnel, such as service technicians
or industrial electricians
Commissioning and
configuration
Qualified personnel, such as technicians or
engineers
Operating the system
Personnel qualified in running and operating the
system (truck operators)
Tab. 1 Target group
1.3
Information depth
These operating instructions contain information about the TPS driver assistance system
on the following topics:
Product description
Mounting
Electrical installation
Commissioning and configuration
Operation
Maintenance and repairs
Fault diagnosis and troubleshooting
Technical data and dimensioned drawings
When planning and using the TPS driver assistance system, technical skills are required
that are not covered by this document.
The official and legal regulations for operating the TPS must always be complied with.
Further information about the device components used in the TPS can be found in the
accompanying operating instructions.
Note
