Operating Instructions
Chapter
6
TPS
8021799/2017-09-26
Operating Instructions | SICK
47
Subject to change without notice
Commissioning
Click on the plus or minus icon to set the distances. The value displayed increases or
decreases by 5 cm with each click.
If you click and hold on the icon, the value automatically goes up or down in increments
of 5 (auto repeat).
Rear sensor: Adjustment preparation
Place the vehicle on flat ground. Make sure no person or object is standing behind the
vehicle.
Rear sensor: Pitch angle
The system further assists the installer in guiding through the pitch angle calibration
procedure.
Indicates that the pitch angle is too small. Increase the pitch angle of the rear 3D LiDAR
sensor downwards until the level indicator is green.
Indicates that the pitch angle is too large. Decrease the pitch angle of the rear 3D LiDAR
sensor upwards until the level indicator is green.
Failure to reach a green indicator will result in the overall setup to fail.
Note
