73
8012426/YWL2/3-0/2016-08| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100
Subject to change without notice
START-UP AND PARAMETER SETTINGS
4
4.4
Setting the Interface module parameters
4.4.1
General information
The following steps are necessary to select and set the optionally available Interface
modules Profibus DP, Modbus TCP and Ethernet type 1:1
▸
Select device file “MCU”, set the measuring system to “Maintenance” mode
▸
Enter the Level 1 password (
see “Password and operating levels”, page 75
▸
Switch to the “Configuration / System Configuration” directory.
The installed interface module is displayed in the field “Interface Module”.
▸
Configure the Interface module according to requirements.
Fig. 44: SOPAS ET menu: MCU/Configuration/System Configuration
GSD file and measured value assignment are available for the Profibus DP module on
request.