78
8012426/YWL2/3-0/2016-08| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100
Subject to change without notice
4
START-UP AND PARAMETER SETTINGS
Setting the MCU variant
The following steps are required to set the MCU for the DUSTHUNTER SP100 sender/
receiver unit to be connected (
see “Assigning the MCU to the sender/receiver unit”,
):
▸
Set the MCU to “Maintenance” mode, select the “MCU Variant” submenu and select the
type “DUSTHUNTER S”.
▸
Enter the default password and store the type with “Save” (confirm twice).
The other selection options have no significance here.
