![background image](http://html1.mh-extra.com/html/sick/dusthunter-sp100/dusthunter-sp100_operating-instructions-manual_1264547089.webp)
89
8012426/YWL2/3-0/2016-08| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100
Subject to change without notice
MAINTENANCE
5
5.3.1
Control unit MCU with integrated purge air supply
Cleaning or replacing the filter element
▸
Open the door of the MCU with the appropriate key.
▸
Loosen strap retainer (1) on the filter outlet and pull filter housing (2) off the connection
piece.
▸
Remove the filter housing.
▸
Rotate filter housing cover (3) in the “OPEN” arrow direction and remove the cover.
▸
Take out the filter element and replace with a new element.
▸
Clean the inside of the filter housing and the filter housing cover with a cloth and brush.
▸
Insert new filter element.
Spare part
: Filter element C1140, Part No. 7047560
▸
Mount the cover on the filter housing cover and rotate opposite to the direction of the
arrow until it clicks into place.
▸
Reinstall the filter housing in the control unit.
Fig. 56: Exchanging the filter element for the control unit with purge air supply
NOTICE:
▸
For wet cleaning, use only a water-soaked cloth and then dry the parts well.
Strap retainer
Filter housing
Filter housing cover