![background image](http://html1.mh-extra.com/html/sick/dusthunter-sp100/dusthunter-sp100_operating-instructions-manual_1264547079.webp)
79
8012426/YWL2/3-0/2016-08| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100
Subject to change without notice
START-UP AND PARAMETER SETTINGS
4
4.5.4.2
Sender/receiver unit
The following steps are required to enter the regression coefficients:
▸
Set the sender/receiver unit to “Maintenance” and select the “Parameter” submenu.
▸
Select the desired parameter and enter the password (
▸
Set the calculated coefficients (
see “Calibration for dust concentration measurement”,
) using the “^” and/or “
→
” buttons and write to the device with “Save” (confirm
twice).
Fig. 49: Entering the regression coefficients
Back Enter
1 cc2
2 cc1
3 cc0
Parameter
/
/param
sensor/1
Back Save
Back Save
Back Save
Back Save
000.000
000.000
-01.130.
-06.780
Parameter
Parameter
Parameter
Parameter
Back Save
Back Save
Password
XXXX
Password
XXXX
Parameter
Parameter
Back Save
Back Save
001.000
000.560.
Parameter
Parameter
Back Save
Password
XXXX
Parameter
1
2
3