25
8012426/YWL2/3-0/2016-08| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100
Subject to change without notice
PRODUCT DESCRIPTION
2
2.2.3.4
Modules
1
Display module
Module to display measured values and status information and for configuration during
start-up, selection via operating buttons.
a) Displays
The graphic display shows two main measured values of a connected sender/receiver unit
selected at the factory or calculated values from the MCU (e.g., scaled dust concentration)
as bar charts. Alternatively, up to 8 single measured values of a sender/receiver unit can
be displayed (toggle with “Meas” button).
Fig. 11: LC-LC-Display with graphic (left) and text (right) display)
b) Control buttons
Type
Display
LED
Power (green)
Voltage supply OK
Failure (red)
Function fault
Maintenance
request (yellow)
Maintenance request
LC-Display
Graphic display
(main screen)
– Dust concentration
– Scattered light intensity
Text display
Two measured values (see graphic display) and 8 diagno-
sis values (
see “LC-Display menu structure”, page 76
Menu
ConcSL 8.6 mg/m³
SL 8.6
ConcSL
8.6
0.0 mg/m³ 200.0
0.0 200.0
SL
8.6
Menu
Button
Function
Meas
●
Toggle between text and graphic display
●
Display the contrast setting (after 2.5 s)
Arrows
Select next/previous measured value page
Diag
Display alarm or fault message
Menu
Display of main menu and selection of submenus
