![background image](http://html1.mh-extra.com/html/sick/1106166/1106166_operating-instructions-manual_1264410076.webp)
Color map
Description
Example
Flat
Uses a solid color rendering.
9.2.5.2
Aspect ratio
Using the
Aspect ratio
button, you can change the resolution and sampling of your data.
Use the
Y resolution
(Profile distance) slider to set the distance between two rows in the
image. For an uncalibrated image, the value is in pixel units, and for a calibrated image
the value is in millimeters. If using encoder triggered mode the
Y resolution
defaults to
the result given by the
Encoder resolution
multiplied by
Pulses per profile
.
Figure 75: Aspect ratio GUI reference
Using the advanced options you can define if data should be skipped when showing the
3D image. Subsampling reduces the amount of data and gives a more responsive 3D
display, especially for large data sets and a slow PC.
Parameter
Description
Sub sampling X
Defines how many samples in the direction across the sensor to
skip. One means that all samples are displayed. This parameter
could force the
Sub sampling Y
to be increased in case the data set
is large.
Sub sampling Y
Defines how many samples in the transportation direction to skip.
One means that all samples are displayed. This could be limited if
the data size is large.
Point limit
Defines how much GPU memory is the maximum allowed to use.
Can only be changed for PCs with certain graphics board proper‐
ties.
9
OPERATION
76
O P E R A T I N G I N S T R U C T I O N S | Ruler3000
8026049//2021-04 | SICK
Subject to change without notice