![background image](http://html1.mh-extra.com/html/sick/1106166/1106166_operating-instructions-manual_1264410070.webp)
Button
Name
Description
Save image
Save the current image to disk.
Fullscreen
Switch to fullscreen mode. This option will hide the parameter settings
pane and the
Cameras
,
2D Image
and
3D Image
tabs.
Load image
Opens a folder on the PC. This option is located on the
Evaluation
tab.
9.1.4
Parameter settings pane
The parameter settings pane retrieves the current parameters from the camera and
allows you to modify them.
When you adjust the parameters, you look at the 2D or 3D image to see the result. You
can load the image to the image list in the
Evaluation
tab after each adjustment and
compare the images to find the best configuration.
NOTE
You cannot edit the parameters while the camera is acquiring data.
The parameter settings pane is located to the right of the image viewer, showing
different parameter categories. It also holds a text box showing a description for the
currently selected parameter at the bottom. The description gives a brief explanation of
the parameter's purpose and its minimum and maximum limits.
Figure 69: Parameter section GUI reference
The Ruler3000 has a large number of parameters that are not exposed in
Stream Setup
but can be configured using GenICam or GenIStream, see
.
9.1.5
Log section
At the bottom of the main window, there is a section where log messages are available.
The messages can be hidden and shown by clicking the
Log
button.
9
OPERATION
70
O P E R A T I N G I N S T R U C T I O N S | Ruler3000
8026049//2021-04 | SICK
Subject to change without notice