8.4.3.1.2
Hold function
The following hold functions are available:
•
Measured value: Holds the measured value which is present when there is a hold
input signal (rising edge).
ON
OFF
1
2
HOLD
1
Measured value
2
Output hold value (sample hold value)
•
Peak value: Holds the largest measured value which is present in the interval
between the last falling edge and the hold input signal (next rising edge).
ON
OFF
1
2
3
HOLD
1
Measured value
2
Output hold value (peak hold value)
3
Interval in which an analysis is carried out.
•
Lowest value: Holds the smallest measured value which is present in the interval
between the last falling edge and the hold input signal (next rising edge).
ON
OFF
1
2
3
3
HOLD
1
Measured value
2
Output hold value (bottom hold value)
3
Interval in which an analysis is carried out.
•
Peak-to-peak value: Holds the differential value between the smallest and the
largest measured value present in the interval between the last falling edge and
the hold input signal (next rising edge).
P(2)
P(1)
B(1)
B(2)
P(1)-B(1)
P(2)-B(2)
ON
OFF
1
3
2
3
HOLD
1
Measured value
2
Output hold value (peak-to-peak hold value)
3
Interval in which an analysis is carried out.
OPERATION VIA DISPLAY
8
8019642/18JN/2020-07-01 | SICK
O P E R A T I N G I N S T R U C T I O N S | OD1000
49
Subject to change without notice
