- 37 -
IR Header (JP6)
If you have an infrared device, this mainboard can implement IR tranfer func-
tion. To enable the IR transfer function, follow these steps:
Pin Assignments:
1=NC 2=KEY
3=VCC 4=GND
5=IRTX 6=IRRX
E7
5
3
1
6
4
2
Note: Before connect your IR device, please be sure each IR on board pin
allocation is matchable with the pin of the IR device. Other wise,
incorrect IR connection may do damage to your IR device.
Pin Assignments:
1=P_-STB
5=PPPD3
9=PPPD7
13=P_SLCT
17=P_-SLIN
21=GND
25=GND
2=P_PPD0
6=P_PPD4
10=P_-ACK
14=P_-AFD
18=GND
22=GND
26=KEY
3=P_PPD1 4=P_PPD2
7=P_PPD5 8=P_PPD6
11=P_BUSY 12=P_PE
15=P_-ERR 16=P_-INIT
19=GND 20=GND
23=GND 24=GND
JP6
IR Header
EXT. Print Port
JP7
Parallel Port Header-EXT. Print Port (JP7)
One 26 pins port header is located at the rear panel of the maiboard. The header
is used to connect the cable attached to parallel connector. But the parallel
cable and connector are optional at the time of purchase.
E8
