Shuttle FX83 User Manual Download Page 46

Page: 46 / 81

- 40 -

4.2 Install Mainboard Software

Select using your pointing device (e.g. mouse) on the “Install Mainboard
Software" bar to install Mainboard Software.

4 SOFTWARE UTILITY

4.1 Mainboard CD Overview

Note: The CD contents attached in FX83 mainboard are subject to change
without notice.
To start your mainboard CD disc, just insert it into your CD-ROM drive and
the CD AutoRun screen should appear.

Navigation Bar Description:

Install Mainboard FX83 Software - Installing VIA 4in1, VIA VGA,
VIA LAN, Realtek Audio, VIA RAID and VIA USB 2.0 drivers.

Install Utility - Installing Utility.

Manual - FX83 Series mainboard user's manual in PDF format.

Link to Shuttle Homepage - Link to shuttle website homepage.

Browse this CD - Allows you to see contents of this CD.

Quit - Close this CD.

FX83 Software includes:
[4.2.A] Install VIA 4in1 Driver
[4.2.B] Install VIA VGA Driver
[4.2.C] Install VIA LAN Driver
[4.2.D] Install Realtek Audio

Driver

[4.2.E] Install VIA RAID Driver
[4.2.F] Install VIA USB 2.0 Driver

Summary of Contents for FX83


















































































Search results

Summary of Contents for FX83

Reviews:

Related manuals for FX83

Brands by name

Popular brands

Shuttle FX83, User Manual

Search results

Summary of Contents for FX83

Reviews:

Related manuals for FX83

Brands by name

Popular brands