- 65 -
Video Off Option
This item specifies on/off for the monitor when it enters the power-
saving mode.
Ø
The choice: Suspend->off or Always On.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video
buffer.
DPMS Support
Initial display power management signaling.
Ø
The choice: V/H SYNC+Blank, DPMS Support or Blank Screen.
MODEM Use IRQ
This determines the IRQ which the MODEM can use.
Ø
The choice: 3, 4, 5, 7, 9, 10, 11 or NA.
Soft-Off by PWR-BTN
Under ACPI you can create a software power down. In a software
power down, the system can be resumed by Wake UP Alarms. This
item lets you install a software power down that is controlled by the
power button on your system. If the item is set to Instant-Off, then the
power button causes a software power down. If the item is set to Delay
4 Sec. then you have to hold the power button down for 4 seconds to
cause a software power down.
Ø
The choice: Instant-Off or Delay 4 Sec.
Run VGABIOS if S3 Resume
This item becomes available when the previous item is seto to S3(STR)
or S1 & S3. The item allows the system to initialize a VGA BIOS from S3
(Suspend to RAM) sleep state.
Ø
The choice: Yes, No or Auto.
PWRON After PWR-Fail
This item select power on function when power fail.
Ø
The choice: Off, On or Former-Sts.
IRQ / Event Activity Detect
Option are in its sub-menu.
Press<Enter>to enter the sub-menu of detailed options.
PS2KB Wakeup Select
Select a hotkey or password to wake up the system.
Ø
The choice: Hot key or Password.
