- 61 -
OnChip IDE Channel0
The chipset contains a PCI IDE interface with support to two IDE chan-
nels. Select Enabled to activate the primary IDE interface; select
Disabled to deactivate this interface.
Ø
The choice: Enabled or Disabled.
OnChip IDE Channel1
The chipset contains a PCI IDE interface with support to two IDE chan-
nels. Select Enabled to activate the secondary IDE interface; select
Disabled to deactivate this interface.
Ø
The choice: Enabled or Disabled.
IDE Prefetch Mode
The onboard IDE drive interfaces support IDE prefetching for faster
drive access. If you install a primary and/or secondary add-on IDE
interface, set this field to Disabled if the interface does not support
prefetching.
Ø
The choice: Enabled or Disabled.
Primary Master/Primary Slave/Secondary Master/
Secondary Slave PIO
Each IDE channel supports a master device and a slave device. These
four items let you assign which kind of PIO ( Programmed Input / Out-
put ) is used by IDE devices. Choose Auto to let the system auto detect
which PIO mode is best or select a PIO mode from 0-4.
Ø
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3 or Mode 4.
SATA Mode
With both SATA H.D. and set On-chip Serial ATA "Enhanced Mode".
You can select SATA Mode as "RAID" to run RAID bios and make raid.
ICH5R raid function raid0, support WinXP.
Ø
The choice: IDE or RAID.
IDE DMA transfer access
Use these items to enable or disabled the IDE DMA transfer access that
are intergrated on the mainboard.
Ø
The choice: Enabled or Disabled.
Secondary Slave UDMA
Each IDE channel supports a master device and a slave device. This
mainboard supports UltraDMA technology, which provides faster
access to IDE devices.
Ø
The choice: Auto or Disabled.
Primary Master/Primary Slave/Secondary Master/
