- 53 -
Boot Up NumLock Status
Selects power-on state for NumLock.
Ø
The choice: Off or On.
Typematic Rate Setting
Keystrokes repeat at a rate determined by the keyboard controller.
When this controller enabled, the typematic rate and typematic delay
can be selected.
Ø
The choice: Enabled or Disabled.
Typematic Rate (Chars/Sec)
This item sets how many times the keystroke will be repeat in a second
when you hold the key down.
Ø
The choice: 6, 8, 10, 12, 15, 20, 24 or 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat
the keystroke.
Ø
The choice: 250, 500, 750 or 1000.
Security Option
Select whether the password is required every time the system boots or
only when you enter setup.
System
The system will not boot and access to Setup will be
denied if the correct password is not entered promptly.
Setup
The system will boot, but access to Setup will be
denied if the correct password is not entered promptly.
Ø
The choice: System or Setup.
Note:To disabled security, select PASSWORD SETTING at Main
Menu, and then you will be asked to enter password. Don't type
anything and just press <Enter>; it will disable security. Once
the security is disabled, the system will boot, and you can enter
Setup freely.
APIC Mode
Via the routing, I/O APIC support a total of 24 interrupts. "Enabled" for
Windows XP and Windows 2000.
Ø
The choice: Enabled or Disabled.
