Shuttle FX83 User Manual Download Page 14

Page: 14 / 81

- 8 -

2 FEATURES

FX83 mainboard is carefully designed for the demanding PC user who wants high perfor-
mance and maximum intelligent features in a compact package.

2.1 Specifications

CPU Support

Supports AMD Althon

64, 754 pin processor with 200 MHz FSB.

Chipset

Features VIA K8M800 N.B. and VT8237 S.B..
Integrated Graphics/Video Accelerator.
8X AGP3.0 interface at 533MHz.
Processor interface via Hyper Transport bus.

Jumperless CPU Configuration

Soft-configuration FSB (The FSB speed is software configurable from 200MHz
to 232MHz in the Frequency / Voltage Control of BIOS setup program.)

On Board 5.1 Channel AC97 Audio

Realtek ALC650 compliant with AC'97 2.2 specifications.
5.1 channel slot selectable DAC Output for multi-channel applications.

Versatile Memory Support

Two 184-pin DIMM slots to support up to 2GB of PC1600, PC2100,
PC2700 or PC3200 compliant DDR SDRAM module.

AGP Expansion Slot

Supports AGP3.0 0.8V signaling for 8X and 4X modes.
Suooprts AGP2.0 1.5V signaling for 4X and 2X modes.

PCI Expansion Slots

PCI 2.2 specification compliance.
Provides one 32-bit PCI slot.

8 USB 2.0/1.1 Complaint Interface Onboard

4 x USB 2.0 connectors on back-panel.

2 x USB 2.0 connectors on front-panel.

2 x USB port headers on mid-board.

Summary of Contents for FX83


















































































Search results

Summary of Contents for FX83

Reviews:

Related manuals for FX83

Brands by name

Popular brands

Shuttle FX83, User Manual

Search results

Summary of Contents for FX83

Reviews:

Related manuals for FX83

Brands by name

Popular brands