- 51 -
MODEM Use IRQ
This item determines the IRQ in which the MODEM can use.
The choice: 1, 3, 4, 5, 7, 9, 10, 11, N/A.
Suspend Option
Select the suspend type.
Soft-Off by PWRBTN
The setting of
Instant-Off
allows the ATX switch to function as a
normal system power off button when pressed for less than 4 seconds.
The setting of
Delay 4 Sec.
Allows the button to have a dual function
where to press the button for less than 4 seconds will place the system
in suspend mode, and pressing the button for more than 4 seconds
will shut place the system off.
HDD Power Down
This item defines the continuous HDD idle time before the HDD
enters power saving mode (motor off). The options are from 1 min to
15 min and Disabled.
Doze Mode
When enabled and after the set time of system inactivity, the CPU
clock will run at slower speed while all other devices still operate at
full speed.
Suspend Mode
When enabled and after the set time of system inactivity, all devices
except the CPU will be shut off.
** PM Events **
PM events are I/O events whose occurrence can prevent the system
from entering a power saving mode or can awaken the system from
such a mode. In effect, the system remains alert for anything occurs to
a device which is configured as On, even when the system is a power
down mode.
VGA
When set to On, any event occurring at a VGA port will awaken a
system which has been powered down.
LPT & COM
When set to LPT/COM (default), any event occurring at a COM (Serial)
/ LPT port will awaken a system which has been powered down.
