- 34 -
ATX Power Supply Connector (J31)
Locate the 20-pin male header ATX power connector (J31) on your
mainboard. Plug the power cable from the ATX power supply unit directly
into J31 ATX power supply connector.
Note 1:
The ATX power connector is directional and will not go in unless
the guides match perfectly making sure that pin#1 is properly
positioned.
Note 2:
Make sure the latch of the ATX power connector clicks into place
to ensure a solid attachment.
Note 3:
For the requirement of CPU power consumption, AV61 needs the
power supply which with 250W minimum load and minimum 20A
DC output current on +5V.
Cooling Fan Connectors for CPU (JP29), Chassis (JP28),
(J43) & (J47)
The mainboard provides four onboard 12V cooling fan power connectors to
support CPU (JP29), Chassis (JP28), (J43) and (J47) cooling fans.
Note:
Both cable wiring and
type of plug may vary
depending on the fan
maker. Keep in mind
that the red wire should
always be connected to
the +12V header and
the black wire to the
ground (GND) header.
21
22
