- 58 -
Integrated Peripherals
OnChip IDE Channel0
This item is used to defined on chip Primary PCI IDE controller is
Enable or Disable setting.
OnChip IDE Channel1
This item is used to defined on chip Secondary PCI IDE controller is
Enable or Disable setting.
IDE Prefetch Mode
Enable prefetching for IDE drive interfaces that support its faster drive
accesses. If you are getting disk drive errors, change the setting to
omit the drive interface where the errors occur. Depending on the
configuration of your IDE subsystem, this field may not appear, and it
does not appear when the Internal PCI/IDE field, above is Disabled.
HDD Block Mode
This item is used to set IDE HDD Block Mode. If your IDE Hard Disk
supports block mode, then you can enable this function to speed up
the HDD access time. If not, please disable this function to avoid
HDD access error.
Primary Master / Slave PIO
In this items, there are five modes defined in manual mode and one
automatic mode. There are
0, 1, 2, 3, 4,
and
AUTO
is the default
settings for on board Primary Master / Slave PIO timing.
