- 11 -
Step 1
Install the CPU
1. Mark your CPU Frequency
Checking the working frequency of your cpu that should be clearly
marked on the CPU cover or write your own combination in the space
provided.
2.
Pentium II/III Processor Installation
<Locate the Retention Mechanism>
To install a CPU, first turn off your system and remove its cover.
Locate the Retention Mechanism
(1)
around the Slot 1.
Take care of the Square Cut Mark
(1.1)
.
Fix
(1)
by inserting Attach Mounts
(1.4)
up through holes
(A1...A4)
in the bottom of the mainboard, and screw the four captive nuts
(1.3)
.
<Install the CPU>
Insert CPU
(2)
into the Retention Mechanism
(1)
.
Ensure that the alignment notch in the processor fits over the plug
(1.2)
, then push processor down firmly until it is seated.
Push the latches
(2.1)
on the processor outward until they click into
place.
Connect power cable
(2.2)
of Fan/Heat Sink.
