- 52 -
HDD & FDD
When set to On (default), any event occurring at a hard or floppy drive
port will awaken a system which has been powered down.
Modem Ring Resume
When set to Enabled, any event occurring Modem Ring/activity of
LAN will awaken a system which has been powered down.
Wake Up On LAN
This item determine the system will resume by activity of LAN. If
enabled this feature system will power-on itself from power off when
the activity of LAN.
RTC Alarm Resume
When set to Enabled RTC Alarm Resume, you could set the date (of
month) and timer (hh:mm:ss), any event occurring at RTC will awaken
system which has been powered down.
Primary INTR
When set to On (default), any event occurring at will awaken a system
which has been powered down.
This following is a list of IRQ, Interrupt ReQuests, which can be
exampled much as the COM ports and LPT port above can. When an
I/O device wants to gain the attention of the operating system, it
signals this by causing an IRQ to occur. When the operation system is
ready to respond to the request, it interrupts itself and performs the
service.
As above, the choices are On and Off.
When set On, activity will neither prevent the system from going into
a power management mode nor awaken it.
- IRQ3 (COM2)
- IRQ4 (COM1)
- IRQ5 (LPT2)
- IRQ6 (Floppy Disk)
- IRQ7 (LPT1)
- IRQ8 (RTC Alarm)
- IRQ9 (IRQ2 Redir)
- IRQ10 (Reserved)
- IRQ11 (Reserved)
- IRQ12 (PS/2 Mouse)
- IRQ 13 (Coprocessor)
- IRQ14 (Hard Disk)
- IRQ15 (Reserved)
