- 59 -
Secondary Master / Slave PIO
In this items, there are five modes defined in manual mode and one
automatic mode. There are
0, 1, 2, 3, 4,
and
AUTO
is the default
settings for on board Secondary Master / Slave PIO timing.
Primary Master / Slave UDMA
On this mainboard, AV61 PCIset improves IDE transfer rate using Bus
Master UltraDMA 33/66 IDE which can handle data transfer up to
33MB/sec. The options are
Disabled,
Enabled and Auto, Auto
is the
default settings for on board Primary Master / Slave
UltraDMA 33/66
.
Note : Your hard drive must also support UDMA for this feature to
work.
Secondary Master / Slave UDMA
On this mainboard, AV61 PCIset improves IDE transfer rate using Bus
Master UltraDMA 33/66 IDE which can handle data transfer up to
33MB/sec. The options are
Disabled,
Enabled and Auto, Auto
is the
default settings for on board Secondary Master / Slave
UltraDMA 33/66
.
Note : Your hard drive must also support UDMA for this feature to
work.
Init Display First
This item is used to determine initial device when system power on. The
options are
PCI
and
AGP
.
POWER ON Function
This item is used to defined Keyboard & PS/2 mouse power-on function
enabled or disabled. The options are
Button Only
,
HOT-Key
and
PS/2
Mouse
.
Button Only - Only soft-on/off button on the front panel is available.
Hot-Key- Power-on by soft-on/off button and keyboard are available.
The user may set power-on hot-key from <Ctrl><F1> to
<Ctrl><F12>.
PS/2 Mouse - Power-on by soft-on/off button and PS/2 Mouse are avail-
able.
Note:1. When item of PS/2 Mouse or HOT-Key is selected, please
also adjust jumper JP38 to the proper position.
2. USB keyboard, USB Mouse and Serial Mouse are not
supported to this function.
