- 12 -
3.
Celeron Processor Installation
<Locate the Retention Mechanism>
To install a CPU, first turn off your system and remove its cover.
Insert two Retention Mechanism
(3)
on opposite side of Slot 1.
Fix
(3)
by inserting Attach Mounts
(4)
up through holes
(A1...A4)
in
the bottom of the mainboard, and screw the four captive nuts
(3.1)
.
<Install the CPU>
Hold the processor
(5)
so that the Heatsink is facing toward the DIMM
sockets on the mainboard.
Slide the processor into the RM. Push the provessor down firmly,
with even pressure on both sides of the top, until it is seated.
