t
t
h
h
e
e
r
r
m
m
o
o
d
d
u
u
a
a
l
l
T
T
D
D
A
A
1
1
5
5
/
/
2
2
5
5
3
3
0
0
/
/
4
4
0
0
SHT Heiztechnik,
aus Salzburg
Operating instructions
M21/HB M27/GB
Page 60
SHT Heiztechnik aus Salzburg GmbH, A-5020 Salzburg-Bergheim, Rechtes Salzachufer 40 Tel. 0662-450444-0, Fax-DW 9
Our current general terms and conditions apply.Errors, printing faults and technical changes reserved
Deactivate measurement operation:
The measurement operation is deactivated automatically after 10 hrs.
The measurement operation can be deactivated prematurely (see also "OFF" or "ON"):
NOTICE 1: After deactivating the measurement operation, the operation mode is automatically
reactivated that was active before the activation.
E.g.: before the activation, the burner switch was set to "OFF" and the fuel selection was set to "Only
logs" – with activating the measurement operation, the burner switch is set to "ON" and the fuel
selection to "Pellets / Logs".
After deactivation, the burner switch is reset to "OFF" and the fuel selection to "Only logs".
NOTICE 2: The measurement operation can also be deactivated via the burner switch (by changing it to
"OFF"); in this case, the burner switch will not be reset into the initial position (meaning: if it was set
to "ON" before activation it remains now on "OFF").