t
t
h
h
e
e
r
r
m
m
o
o
d
d
u
u
a
a
l
l
T
T
D
D
A
A
1
1
5
5
/
/
2
2
5
5
3
3
0
0
/
/
4
4
0
0
SHT Heiztechnik,
aus Salzburg
Operating instructions
M21/HB M27/GB
Page 24
SHT Heiztechnik aus Salzburg GmbH, A-5020 Salzburg-Bergheim, Rechtes Salzachufer 40 Tel. 0662-450444-0, Fax-DW 9
Our current general terms and conditions apply.Errors, printing faults and technical changes reserved
•
H-circ. 1 Temperatures
HighTemp.mode 22.0°C:
This value is adjustable! Here, the requested room temperature during
"High-Temp." mode (see "H-circ. 1 Operational Mode") is set.
Low-Temp.mode 18.0°C:
This value is adjustable! Here, the requested room temperature during
"Low-Temp." mode (see "H-circ. 1 Operational Mode") is set.
Heat.circuit Off when
Outd.temp.over 21.0°C:
This value is adjustable! Here, the temperature setting "Summer/Winter
Changeover") is set. If the average outside temperature exceeds that
temperature value, the heating circuit switches off (Display "Summer" in
status line of menu frame "H-circ. 1 Monitor").
If heating operation is requested nevertheless (e.g. on a rainy summer
day), see "H-circ. 1 Operational Mode.
actual 11.3°C:
Displays the current outside temperature average.
Heatcurve:
Via this field, you access the menu frame "H-circ. 1 Heatcurve" – (see
"Navigating the menu").
Timeprogr.:
Via this field, the menu frame "H-circ. 1 Timeprogr." is accessed –-
(see “Navigating the menu“).
•
H-circ. 1 Timeprogram
„TU“:
At entering this frame, here, the abbreviation for the current weekday (MO
TU WE TH FR SA SU) is displayed. Here, the reqested day can be entered
on which the timeprogram should be adjusted or controlled.
From "6:00" to "9:00":
These values are adjustable!
This is the first time slot of heating circuit 1. If the current system time
(see main menu "Date/Time") is situated between these two points and
the heating circuit operational mode is set to "Automatic High/Low", the
heating circuit runs on "High temperature" (see "H-circ. 1 Operational
Mode").
NOTICE: The time points can only be entered in ascending order. In case
of missentry, it will be corrected automatically.
From „11:30“ to
„13:00“:
This is the second time slot of heating circuit 1 (see description of "first
time slot")
day
hour
minute
time slot 1
time slot 2
time slot 3