− 11 −
ｄ
The liquid seal surface should be
300mm or farther below the
drain pipe in order to allow
drain pipe discharge. An
optional floor stand with a
height of 600mm is available
(see Fig.2) (For drain piping
details, see page 19, item (3)
"Drain tube piping").
ｅ
Leave a 500mm margin of
space at all sides of the
product to permit filter
replacements, maintenance,
and inspections.
②
CRM-V Series
Do not hold the Mistresa by the terminal
box when moving the unit. Hold the
Mistresa somewhere other than the
terminal box or attach the included
hanger bolts as shown in the photo at
right* to lift and relocate the unit.
*Remove the screws that lock down the
side covers.
Fig.2
A
３００
ｍ
ｍ
Summary of Contents for Mistresa CRH Series
