− 24 −
b. End demister and filter inspection and replacement
(
□□２→□□３ □□３→□□２
)
Remove the screws that lock down the side cover and detach the
side cover so that the end demister (end filter) is visible.
1
Pull out the end
demister (end filter).
2
S and V models
S and V models
Replacing the end demister of V model units
V model Mistresas require side demisters.
To replace the end demister with an end
filter, detach the side demister (see d [4] - [5])
and to replace the end filter with an end demister,
install a new side demister (see c [4] - [5]).
3
After inspecting and removing the end demister/filters
Insert the end demister (end filter) into the filter frame and reattach the
side cover with the original screws. (With S model Mistresas, insert the
end filter with the seam to the bottom.)
4
S and V models
【
NOTE V model with demister
】
Side demister
Summary of Contents for Mistresa CRH Series
