− 25 −
c. End demister and filter inspection and replacement
(
□□１→□□２ □□１→□□３
)
Remove the screws that lock down the side cover and detach
the side cover so that the outer cylinder on the main body side
and cover outer cylinder on the side cover side are visible.
1
Detach the outer cylinder from
the main body.
Screws H02 and H04: 3
H07, H15 and H22: 4
2
S and V models
For V model with end demister
Tuck the side demister in the 4
corners.
4
V model with end demister
Attach the filter frame to the main
body.
Screws 2
5
S and V models
To detach the outer cylinder and
install the filter frame, use a long
screwdriver (200 mm or longer
shaft). Smaller screwdrivers may
not reach the screws if the
handle gets stuck in the opening.
3
【
NOTE S and V models
】
S and V models
Cover outer cylinder
Outer cylinder
Shaft
Handle
Summary of Contents for Mistresa CRH Series
